Match existing inventory to factory requirements,

while keeping waste to a minimum.

Model 200MP-7 Shown

Maximize your inventory on the ground:

> Eliminate scrap and scrap recovery.

> Take advantage of available lumber lengths.

> Cut units to accommodate specific saws.

 

A portable yard saw is a simple, forward thinking solution to maximizing effectiveness of stocked lumber in your factory. Match lengths to saw requirements (Roofs, Floors or Wall Panels), use up less desired inventory and eliminate scrap recovery at the source, not the cut-off bin.

 

 

L-M Yard Saws feature 7' double ended saw bar and chain. Saw bar pivots on a cast steel “TUFFEE” mandrel and uses spring loaded take up. The saw bar is guarded by an aluminum outrigger arm which helps hold the saw in position during the cutting cycle. The saw is assembled on a side shifting base with 3" of lateral travel to accurately position the cut.

L-M YARD SAW MODEL 200 MP-7

The 200 MP-7 uses a 20 HP Honda gasoline engine to power the saw and moves on 12" pneumatic wheels. The engine has an electric starter with an on-board battery and charging system.

 

Maximum package size is 48" x 52" @ 10" off the ground.

Machine weight: 1100 lbs.

 

L-M YARD SAW MODEL 150 MP-7

This portable package saw has a 15 HP TEFC 480 volt electric motor - 480v / 3phase / 60 hz manual motor starter in a NEMA 4 enclosure, mounted on the frame and is ready to wire.

 

Maximum package size is 48" x 52" @ 10" off the ground.

Machine weight: 1100 lbs.

 

 

 

200MP-7 Features

▶  20 HP Honda 4-Stroke, fan cooled gas engine.

▶  Electric and Manual Start.

▶  Auto “low oil” shut down.

▶  Centrifugal clutch to allow engine idle.

▶  12" Pneumatic wheels for rough terrain.

▶  3" Slide shifting.

▶  Automatic Chain Oiler.

▶  7' Double end saw bar.

▶  Quick chain tension take-up.

▶  Standard .404 pitch saw chain w/ 3/8" kerf.

▶  Max. package size: 48" x 52" wide.

 

150MP-7 Features 

▶  15 HP, 480 volt / 3 phase

▶  3" Slide shifting.

▶  Automatic Chain Oiler.

▶  7" Double end saw bar.

▶  Quick chain tension take-up.

▶  12" Pneumatic wheels.

▶  Standard .404 pitch saw chain w/ 3/8" kerf.

▶  Max. package size: 48" x 52" wide.

 

 

More information.